Water Based Coating Selections
Water Based Coating Selections
The chart below is a listing of current water
based coatings. They can be
applied via flexo, gravure (~6BCM cell volume),
or blanket coaters and have
been optimized for wetting and smooth dry
over wet litho inks. All are silicone
free and most are glueable except for low COF and Release Coatings which
may contain silicones and may not be glueable.
| Product | Viscosity (cps) |
Application |
| 6911AS | 230-500 | Clear, antistatic coating for paper |
| 6915M | 200-300 | Texture Coating |
| 6921CB | 300-500 | Blue CB (Coated Back) Coating |
| 6921CBK | 300-500 | Black CB (Coated Back) Coating |
| 6921CF | 300-500 | Develop Surface Coating (CF, Coated Front) |
| 6921SC | 250-300 | Blue Self Contained Carbonless Coating |
| 6921SCK | 250-300 | Black Self Contained Carbonless Coating |
| 6930M | 300-400 | Thermal Release Coating |
| 6933N2 | 150-300 | High Quality, High Cost OPV |
| 6937A | 300-500 | Highest Gloss Moderate Cost OPV |
| 6939A | 350-750 | Very High Temp. Resistant OPV (500°F) FDA |
| 6942A | 275-425 |
High COF, Moderate Gloss, FDA, OPV |
| 6943A | 75-210 |
Very Low MVTR, Low slide, Gloss, FDA, OPV |
| 6944G | 40-70 |
Very Low MTVR, High Water Resistantance, High Gloss, FDA, OPV for Paper |
| 6944L | 120-350 |
Very Low COF, High Water Resistance, High Gloss, FDA OPV for Film and Foil |
| 6948A | 600-1000 |
FDA OPV Oil Resistant |
| 6950M | 100-200 |
General Purpose High Gloss OPV, Laser Printable |
| 6950MH | 300-400 |
High Solids Version of 6950M |
| 6950MS | 100-200 | High Slip Version of 6950M |
| 6953MFD | 350 | Laser Imprintable High Gloss OPV |
| 6953MFG | 200-250 | FDA High Gloss/Grease Resistant OPV |
| 6954MI | 150-250 | OPV with Black Light Indicator |
| 6955M | 100-200 | High Durability Gloss OPV |
| 6957MT10 | 175-225 | Matte (Low Gloss) General Purpose OPV |
| 6957MTW | 175-300 | Water Resistant Matte OPV |
| 6957MDC | 175-250 | Laser Imprintable Matte OPV |
| 6960B | 325-385 | Primer for Wet on Wet UV Coatings |
| 6950CLR | 100-200 | Release Coating for 3991 Series Adhesives |
| 6960CLF | 100-200 | Looser Release for 3991 Series Adhesives |
| 6960CLM | 600-800 | Super Fast Drying OPV |
| 6953MFD | 300-350 | Rub Resistant, Laser Printable, Ultra High Gloss OPV |
| 6954MI | 150-250 | Black Light Indicator |
| 6962MP | 150-200 | UV Primer |
| 6962MPAI | 300-350 | UV Primer with Black Light Indicator |
| 6954MI | 150-250 | Black Light Indicator |
| 6962MPAH | 300-500 | High Viscosity (for absorbent substrates) UV Primer |
| 6962MPAK | 600-700 | Higher Viscosity Version of 6962MPAH |
| 6962MPB | 150-200 | UV Primer, Fast Dry, 6962MP Type |
| 6963MCP | 75-125 | Primer for Aluminum Foil |
| 6964ML | 100-200 | Primer for Lamination of Heat Seal Film and UV OPV |
| 6965M | 100-200 | Water Based Primer for Use With 1045 Series UV Release Coatings |
| 6965MHS | 500-900 | Primer for UV Silicone, Low Curl, High Soilds |
| 6971RD | 300-500 | Release Coating for Aggressive PSA's |
| 6972RCF | 75-225 | Release Coating for Dry W/B PSA's for Treated Olefin and Polyester Films |